Credits for all the unit standards listed below are required.
Unit No. | Unit Standard Title | Level | Credits |
Unit ID: 1459 | Operate and maintain conveyors at a metallurgical plant |
2 | 8 |
Unit ID: 1464 | Operate feeding system | 2 | 2 |
Unit ID: 1530 | Classify material in a metallurgical plant | 2 | 6 |
Unit ID: 1540 | Maintain grinding medium load in a mill | 3 | 8 |
Unit ID: 1542 | Reline a mill within scope of own responsibility | 3 | 12 |
Unit ID: 1529 | Clarify a solution | 2 | 6 |
Unit ID: 1527 | Operate an over-belt magnetic separator | 2 | 2 |
Unit ID: 1554 | Control an ore storage and transport system | 3 | 12 |
Unit ID: 1562 | Control the crushing and screening operation in a metallurgical plant |
4 | 15 |
Unit ID: 1568 | Control the milling and classification operation in a metallurgical plant |
4 | 15 |
Unit ID: 1544 | Operate screens in a metallurgical plant | 3 | 14 |
Unit ID: 1533 | Break oversize rock | 3 | 8 |
Unit ID: 1547 | Conduct stockpile reclaiming operations | 3 | 4 |
Unit ID: 1530 | Classify material in a metallurgical plant | 2 | 6 |
Unit ID: 1529 | Clarify a solution | 2 | 6 |
Unit ID: 1535 | Treat and dispose of rejects and tailings | 3 | 12 |
Unit ID: 1544 | Operate screens in a metallurgical plant | 3 | 14 |
Unit ID: 1406 | Operate fluid mixing equipment | 3 | 6 |
Unit ID: 1459 | Operate and maintain conveyors at a metallurgical plant |
2 | 8 |
Unit ID: 1532 | Operate a tailings disposal system | 3 | 10 |
Unit ID: 1535 | Treat and dispose of rejects and tailings | 3 | 12 |
Credits for all the unit standards listed below are required.
Unit No. | Unit Standard Title | Level | Credits |
Unit ID: 1463 | Operate compressors in a metallurgical plant | 2 | 4 |
Unit ID: 1466 | Operate air-blower system | 3 | 6 |
Unit ID: 1461 | Transfer bulk fluids into and out of storage facility | 2 | 8 |
Unit ID: 1458 | Apply operational maintenance skills | 2 | 10 |
Unit ID: 1462 | Conduct pump operations | 2 | 4 |
Unit ID: 1489 | Perform basic tests as part of metallurgical operations |
3 | 12 |
Unit ID: 1491 | Control and monitor automated plant and machinery |
4 | 14 |
Unit ID: 1492 | Monitor and control a metallurgical plant from a control room |
4 | 15 |
Unit ID: 1483 | Transfer fluids by means of a pump | 4 | 8 |
Unit ID: 1494 | Decommission plant | 4 | 6 |
Unit ID: 1495 | Perform calibration checks on laboratory equipment |
3 | 6 |
Unit ID: 1496 | Monitor and coordinate waste and process water treatment |
4 | 10 |
Unit ID: 1497 | Apply the concept of motivation in a leadership context |
4 | 6 |
Unit ID: 1498 | Process and interpret data in the context of metallurgical processing |
4 | 8 |
Unit ID: 1490 | Isolate and lock-out plant and equipment | 3 | 10 |
Unit ID: 1569 | Perform metallurgical tests | 3 | 6 |
Unit ID: 1561 | Work safely with instruments that emit radiation | 3 | 6 |
Unit ID: 848 | Develop procedures to safely control work operations |
4 | 6 |
Unit ID: 849 | Monitor procedures to safely control work operations |
4 | 5 |
Unit ID: 850 | Supervise the health, safety and welfare of an employee new to the role in the workplace |
4 | 8 |
Unit ID: 851 | Advocate and keep pace with improvements in health and safety practice |
4 | 6 |
Unit ID: 852 | Develop and maintain individual and organisational competence in health and safety matters |
4 | 8 |
Unit ID: 853 | Develop and implement effective communication systems for health and safety information |
4 | 7 |
Unit ID: 855 | Conduct a health and safety risk assessment in a workplace |
5 | 10 |
Unit ID: 858 | Investigate and evaluate health and safety incidents, accidents, and complaints in the workplace |
5 | 8 |
Unit ID: 859 | Promote a positive health and safety culture in workplaces |
5 | 10 |
Unit ID: 860 | Review health and safety procedures in workplaces |
5 | 8 |
A minimum of 31 credits is required
Unit No. | Unit Standard Title | Level | Credits |
Unit ID: 1541 | Neutralise cyanide spillage | 3 | 8 |
Unit ID: 1559 | Conduct thickening and clarifying process in a metallurgical plant |
3 | 6 |
Unit ID: 1399 | Demonstrate knowledge of handling and storing cyanide |
1 | 4 |
Unit ID: 1405 | Demonstrate mechanical awareness and plant appreciation as part of hydrometallurgy operations |
2 | 20 |
Unit ID: 1402 | Determine relative density by means of a density scale |
2 | 3 |
Unit ID: 1503 | Demonstrate mechanical awareness and plant appreciation as part of pyrometallurgy operations |
2 | 20 |
Unit ID: 1089 | Sling regular loads and communicate during crane operations |
3 | 20 |
Unit ID: 1093 | Lift and place loads with truck-mounted crane | 3 | 20 |
Unit ID: 1018 | Carry out road construction and maintenance activities using a rotary broom |
2 | 8 |
Unit ID: 1118 | Lift, move and place loads with a forklift as part of surface mining and quarrying operations |
2 | 5 |
Unit ID: 1119 | Carry out surface mining and quarrying activities using a service vehicle |
2 | 8 |
Unit ID: 1549 | Perform gravity concentration in a metallurgical plant |
2 | 6 |
Unit ID: 1558 | Process lime products | 3 | 14 |
Unit ID: 1543 | Separate material by means of a magnetic separator |
3 | 8 |
Unit ID: 1539 | Handle liquid cyanide safely in a metallurgical plant | 3 | 7 |
Unit ID: 1538 | Handle cyanide solids safely in a metallurgical plant |
3 | 7 |
Unit ID: 1534 | Conduct stacker operations | 3 | 5 |
Unit ID: 1526 | Convey material by means of a bucket elevator | 2 | 4 |
Unit ID: 1525 | Hand sort material in a metallurgical plant | 1 | 2 |
Unit ID: 1528 | Wash material by means of a rotary scrubber | 2 | 2 |
Unit ID: 1564 | Control the dense medium separation process in a metallurgical plant |
4 | 15 |
Unit ID: 1565 | Control the gravity concentration process in a metallurgical plant |
4 | 15 |
Unit ID: 1566 | Control jig operation process in a metallurgical plant |
4 | 15 |
Unit ID: 1567 | Control the lump ore beneficiation process | 4 | 15 |
Unit ID: 1570 | Operate and monitor a dust collection plant | 4 | 15 |
Unit ID: 1556 | Grind and mill material in a metallurgical plant | 3 | 10 |
Unit ID: 1402 | Dispatch metallurgical by-products | 2 | 4 |
Unit ID: 1409 | Handle reagents safely in a metallurgical plant | 2 | 6 |
Unit ID: 1448 | Conduct pipeline pigging | 3 | 8 |
Unit ID: 1505 | Bulk package and store product | 3 | 8 |
Unit ID: 1504 | Conduct dispatch operations | 3 | 6 |
Unit ID: 1502 | Conduct calcinations activities | 3 | 8 |
Unit ID: 1543 | Separate material by means of a magnetic separator |
3 | 8 |
Unit ID: 1562 | Control the crushing and screening operation in a metallurgical plant |
4 | 15 |
Unit ID: 1525 | Hand sort material in a metallurgical plant | 1 | 2 |
Unit ID: 1529 | Clarify a solution | 2 | 6 |
Unit ID: 1563 | Control the de-watering process in a metallurgical plant |
4 | 15 |
Unit ID: 1564 | Control the dense medium separation process in a metallurgical plant |
4 | 15 |
Unit ID: 1565 | Control the gravity concentration process in a metallurgical plant |
4 | 15 |
Unit ID: 1566 | Control jig operation process in a metallurgical plant |
4 | 15 |
Unit ID: 1567 | Control the lump ore beneficiation process | 4 | 15 |
Unit ID: 1568 | Control the milling and classification operation in a metallurgical plant |
4 | 15 |
Unit ID: 1536 | Perform size separation in a metallurgical plant | 3 | 6 |
Unit ID: 1556 | Grind and mill material in a metallurgical plant | 3 | 10 |
Unit ID: 1417 | Recover a mineral from ore by means of flotation | 3 | 10 |
Unit ID: 1415 | Neutralise waste streams in a metallurgical plant | 2 | 3 |
Unit ID: 1410 | Off-load reagents into a storage facility | 3 | 5 |
Unit ID: 1408 | Conduct digestion operations | 3 | 6 |
Unit ID: 1407 | Conduct aeration operations | 3 | 6 |
Unit ID: 1409 | Handle reagents safely in a metallurgical plant | 2 | 6 |
Unit ID: 1402 | Dispatch metallurgical process by-products | 2 | 4 |
Unit ID: 1418 | Reclaim and treat water in a metallurgical plant | 3 | 8 |
Unit ID: 1443 | Control the drying operation in a metallurgical plant |
4 | 15 |
Unit ID: 1448 | Conduct pipeline pigging | 3 | 8 |
Unit ID: 1424 | Operate a drying plant | 3 | 10 |
Unit ID: 1425 | Operate pipeline stations and equipment | 3 | 6 |
Unit ID: 1429 | Filter liquids from solids in a metallurgical plant | 2 | 7 |
Unit ID: 1530 | Classify material in a metallurgical plant | 2 | 6 |
Unit ID: 1544 | Operate screens in a metallurgical plant | 3 | 14 |
Unit ID: 1529 | Clarify a solution | 2 | 6 |
Unit ID: 1563 | Control the de-watering process in a metallurgical plant |
4 | 15 |
Unit ID: 1524 | Distribute tailings | 2 | 8 |
Unit ID: 1560 | Monitor tailings dam environment | 3 | 8 |
Unit ID: 1415 | Neutralise waste streams in a metallurgical plant | 2 | 3 |
Unit ID: 1418 | Reclaim and treat water in a metallurgical plant | 3 | 8 |
Unit ID: 1443 | Control the drying operation in a metallurgical plant |
4 | 15 |
Unit ID: 1424 | Operate a drying plant | 3 | 10 |
Unit ID: 1406 | Operate fluid mixing equipment | 3 | 6 |
Unit ID: 1425 | Operate pipeline stations and equipment | 3 | 6 |
Unit ID: 1429 | Filter liquids from solids in a metallurgical plant | 2 | 7 |
NTA Village
10 Rand Street,
Khomasdal, Windhoek
Phone: +264 61 207 8550
Write us: info@nta.com.na
P.O. Box 70407, Khomasdal, Windhoek, Nam